โ RNS 1.4.2 released https://pypi.org/project/rns/
๐ฌค rns.recipes
top
โโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโ
โ Noob question โ
โโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโ
Started by wbknl ยท 10d ago
โโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโ
post-1
โญโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโฎ
โ wbknl #1 โ
โฐโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโฏ
โธ 10d ago
Hi,
New to Reticulum, I would like to know how can I, in MeshChat, make available a bridge
from my WiFi LAN (Default Interface) to the configured TCP clients. The goal is to use a
smartphone only connected to the WiFi LAN and be able to reach users outside the LAN.
Thanks
wbknl
โ 0 โ 0 โค 0
โโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโ
post-2
โญโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโฎ
โ anon #2 โ
โฐโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโฏ
โธ 10d ago
you need a transport node connected to both interfaces for a device on the LAN to reach
other devices which are connected to said TCP clients and vice-versa
โ 0 โ 0 โค 0
โโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโ
post-3
โญโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโฎ
โ wbknl #3 โ
โฐโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโฏ
โธ 10d ago
anon wrote:
> you need a transport node connected to both interfaces for a device on the LAN to
reach other devices which are connected to said TCP clients and vice-versa
how can I configure that? Is there any tutorial? Thanks for your reply and kindness.
โ 0 โ 0 โค 0
โโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโ
post-4
โญโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโฎ
โ anon #4 โ
โฐโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโฏ
โธ 10d ago
wbknl wrote:
> anon wrote:
> > you need a transport node connected to both interfaces for a device on the LAN
to reach other devices which are connected to said TCP clients and vice-versa
>
> how can I configure that? Is there any tutorial? Thanks for your reply and kindness.
Basically you need another device thats connected to both, so you would either need your
meshchat node to be a transport node connected to both, or another device to do that,
itโs pretty easy to do in the interfaces and settings areas of meshchat
โ 0 โ 1 โค 0
โโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโ
post-5
โญโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโฎ
โ Anonymous #5 โ
โฐโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโฏ
โธ 9d ago
Yeah, if you want to do TCPServer <-> Internet <-> Meshchat <-> local Wifi <-> RNS on
Smartphone
go to Settings -> Network -> Transport Mode -> Enable Transport Mode in MeshchatX. Than
restart MeshchatX and it should work.
โ 0 โ 0 โค 1
โโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโ
post-6
โญโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโฎ
โ Mark #6 โ
โ bc7291552be7a58f โ
โฐโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโฏ
โธ 9d ago
On the machine that has both the internal wifi interface ( AutoInterface )
and connections to nodes on the internet ( BackboneInterface or
TCPClientInterface ), just enable transport, and you're good to go, the smartphone
can now reach anything the transport node can reach.
However, to improve your configuration, you should at least set AutoInterface
on the transport node to gateway or internal mode,
so clients on your internal WiFi can recursively resolve paths (makes getting paths much
faster).
Another option is (if you don't want to see the constant stream of incoming announces
from the wide world on your internal network) to set the interfaces that connect to the
wide world to boundary mode. If you do that, your internal clients will
still be able to resolve paths and connect to anything else, but you will only get
announces for the destinations they ask for.
โ 1 โ 0 โค 1
โโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโ
post-7
โญโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโฎ
โ Anonymous #7 โ
โฐโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโฏ
โธ 8d ago
Thanks for all your help. I've made it work.
โ 0 โ 0 โค 0
โโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโ
post-8
โญโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโฎ
โ wbknl #8 โ
โฐโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโฏ
โธ 8d ago
Thanks for all your help. I've made it work.
โ 0 โ 0 โค 1
โ INFO โ Identify to this node to post. How?
bottom